GeeekPi Raspberry Pi Pico Kit Flexible Microcontroller Mini Development Board,Based on The Raspberry Pi RP2040,Dual-Core ARM Cortex M0+ Processor,Running up to 133 MHz, Support C/C++ / Python

Description

The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip.
It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces.
The Raspberry Pi Pico features two ARM Cortex-M0+ cores run up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing options.
This is paired with 2MB of onboard QSPI Flash memory for code and data storage.
In addition to powerful hardware resources, Pico has rich and complete software support and community resources.
It comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.
Pico has been designed to use either soldered 0.1" pin-headers (it is one 0.1" pitch wider than a standard 40-pin DIP package) or can be used as a surface-able 'module', as the user IO pins are also castellated.
There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow soldered SMT module.

Features

Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz.
264 KB of SRAM, and 2 MB of on-board flash memory.
Castellated module allows soldering direct to carrier boards.
USB 1.1 host and device support.
Low-power and dormant modes.
Comprehensive C / C++ / Micropython SDK, software examples, and documentation.
Drag and drop programming using mass storage over USB.
26 x multi-function GPIO pins.
2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels.
Accurate clock and timer on-chip.
Temperature sensor.
Accelerated floating-point libraries on-chip.

Package Includes:

1 x Raspberry Pi Pico
2 x 20pin Pin-Header
2 x 3pin Pin-Header
1 x USB Cable

• Low Cost & High Performance---Raspberry Pi Pico is a micro-controller board based on the Raspberry Pi RP2040 micro-controller chip. It has been designed to be a low-cost, high-performance micro-controller board with flexible digital interfaces..
• CPU Features---Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory..
• Multiple Software Support---Raspberry Pi Pico has rich and complete software support and community resources. It comes with a complete Rasberry Pi official C / C++ SDK, Micropython SDK..
• Multi-Function GPIO Pins---It has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels..
• Custom Peripheral Support---8 × Programmable I/O (PIO) state machines for custom peripheral support.